CORREAS MULTIBAND SPB 2580 RIB 2
Artículo
MBSPB25802
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (mm): | 2.580 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS ACANALADAS 356 J PULG. 14 NERV. 16
Artículo
356J16
MANGUITOS PASO METRICO T10-1500 W. 300
Artículo
MT101500
CORREAS PASO METRICO T2.5-230 A. 12
Artículo
12T25230
CORREAS MULTIBAND SPB 6000 RIB 3
Artículo
MBSPB60003