CORREAS MULTIBAND SPB 7100 RIB 2
Artículo
MBSPB71002
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (mm): | 7.100 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS TRAP. CUBO PLENO SPC 180-5
Artículo
CM01805
CORREAS DENTADAS HTD 204 3M 09 Z=68
Artículo
2043M09
CORREAS PASO METRICO AT5-420 A. 10
Artículo
10AT5420
CORREAS DENTADAS HTD 210 3M 09 Z=70
Artículo
2103M09