MANGUITOS PASO METRICO AT10-1010 W. 300
Artículo
MAT101010
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Manguito dentado paso metrico |
Ancho (mm): | 300 |
Dientes: | 101 |
Desarrollo (mm): | 1.010 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
MOTOR ELÉCTR. IE1 80B 1,10KW 2P 230/400V B3
Artículo
M10801102B3
POLEAS DENTADAS XL037 (AL) Z=036
Artículo
XA37036
POLEAS TRAP. CASQ.CONICOS SPB335-10
Artículo
BT0335X
MOTOR ELÉCTR. IE3 160M 11KW 4P 400/690V B3
Artículo
M316011X4B3