CORREAS PASO METRICO T5-1440 A. 10
Artículo
10T51440
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 10 |
Dientes: | 288 |
Desarrollo (mm): | 1.440 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS PARA VAR. DE VELOC. 17X6 DES. 550
Artículo
550VR17X6
MOTOR ELÉCTR. IE1 71A 0,37KW 2P 230/400V B3
Artículo
M10710372B3
CORREAS DENTADAS HTD 550 5M 15 Z=110
Artículo
5505M15
MOTOR ELÉCTR. IE1 200LB 2P 37KW 400/690V B3
Artículo
C120037X2B3