CORREAS PASO METRICO T2.5-915 A. 12
Artículo
12T25915
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 12 |
Dientes: | 366 |
Desarrollo (mm): | 915 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS 850 H 100 DES. 2159 Z=170
Artículo
850H100
POLEAS DENTADAS L050 Z=011
Artículo
L050011
CORREAS DENTADAS HTD 2800 14M 170 Z=200
Artículo
280014M170
MANGUITOS PASO METRICO T10-910 W. 300
Artículo
MT10910