CORREAS PASO METRICO T10-1960 A. 32
Artículo
32T101960
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 32 |
Dientes: | 196 |
Desarrollo (mm): | 1.960 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS PASO METRICO AT5-2000 A. 16
Artículo
16AT52000
CORREAS PASO METRICO AT10-730 A. 25
Artículo
25AT10730
CORREAS TRAP. CLASICAS A 30 DES. 762
Artículo
762A30
PINONES SIMPLES 3/4X7/16 Z=020
Artículo
11SD820