CORREAS PASO METRICO T10-1960 A. 16
Artículo
16T101960
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 16 |
Dientes: | 196 |
Desarrollo (mm): | 1.960 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
RUEDA CILINDRICA CON CUBO MOD. 2,5 Z=043
Artículo
PM29043
DISCOS SIMPLES 6X2,8 Z=014
Artículo
CS02014
CORREAS DENTADAS HTD 2400 8M 20 Z=300
Artículo
24008M20
SEMIACOPLAMIENTO CUBO "B" 24 (ACERO)
Artículo
SGMBA24