CORREAS PASO METRICO T10-1210 A. 16
Artículo
16T101210
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 16 |
Dientes: | 121 |
Desarrollo (mm): | 1.210 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
MOTOR ELÉCTR. IE1 100LB 3,00KW 4P 230/400V B3
Artículo
M11003004B3
CORREAS DENTADAS HTD 1263 3M 03 Z=421
Artículo
12633M03
POLEAS DENTADAS T2,5-16 Z=016
Artículo
16T2016
MOTOR ELÉCTR. IE3 200L 4P 30KW 400/690V B5
Artículo
C320030X4B5