CORREAS PASO METRICO T10-1140 A. 50
Artículo
50T101140
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 50 |
Dientes: | 114 |
Desarrollo (mm): | 1.140 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS PASO METRICO AT10-920 A. 50
Artículo
50AT10920
CORREAS DENTADAS HTD 474 3M 03 Z=158
Artículo
4743M03
CORREAS DENTADAS HTD 447 3M 06 Z=149
Artículo
4473M06
CORREAS DENTADAS HTD 420 3M 09 Z=140
Artículo
4203M09