CORREAS PASO METRICO T10-1140 A. 16
Artículo
16T101140
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 16 |
Dientes: | 114 |
Desarrollo (mm): | 1.140 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
PINONES SIMPLES TEMPLADOS 1"X17,02 Z=038
Artículo
PS12T38
CORREAS TRAP. ESTRECHAS SPZ 722 DES. 735
Artículo
SPZ722
PINONES SIMPLES 3/8X7/32 Z=019
Artículo
05SA419
PINONES SIMPLES 3/8X7/32 Z=018
Artículo
05SA218