CORREAS PASO METRICO T10-1010 A. 50
Artículo
50T101010
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 50 |
Dientes: | 101 |
Desarrollo (mm): | 1.010 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS PASO METRICO AT10-810 A. 50
Artículo
50AT10810
CORREAS DENTADAS HTD 447 3M 09 Z=149
Artículo
4473M09
CORREAS DENTADAS HTD 426 3M 09 Z=142
Artículo
4263M09
CORREAS DENTADAS HTD 420 3M 03 Z=140
Artículo
4203M03