CORREAS PASO METRICO AT10-660 A. 32
Artículo
32AT10660
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 32 |
Dientes: | 66 |
Desarrollo (mm): | 660 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS H100 Z=030
Artículo
H100030
POLEAS DENTADAS T10-31 Z=015
Artículo
31T1015
POLEAS DENTADAS XL037 (AL) Z=018
Artículo
XA37018
POLEAS DENTADAS ST5-36 Z=025
Artículo
36ST525