CORREAS PASO METRICO AT10-500 A. 50
Artículo
50AT10500
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 50 |
Dientes: | 50 |
Desarrollo (mm): | 500 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
Ruedas cilind. dientes templados mod. 2,5 Z=050
Artículo
PM29T50
PINONES SIMPLES 5/8X3/8 Z=024
Artículo
10SD224
POLEAS TRAP. CASQ.CONICOS SPB560-10
Artículo
BT0560X
CORREAS TRAPECIALES DOBLES AA 72
Artículo
AA72