CORREAS PASO METRICO AT10-1320 A. 32
Artículo
32AT101320
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 32 |
Dientes: | 132 |
Desarrollo (mm): | 1.320 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
REDUCTOR TSF: VTS 086 P R46 F19 B3
Artículo
VTS08646F19
PINONES CASQ.CONIC.SIMPLES 1/2X5/16 Z=016
Artículo
TS09016
POLEAS TRAP. POLY-V CASQ. CONICOS PL 90-12
Artículo
LT09012