CORREAS PASO METRICO AT10-1250 A. 50
Artículo
50AT101250
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 50 |
Dientes: | 125 |
Desarrollo (mm): | 1.250 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS TRAP. DENTADAS XPA 982 - 1000
Artículo
XPA982
CASQUILLOS CONICOS 3525 TAL. MM. 35
Artículo
3525035
CORREAS PASO METRICO AT10-1050 A. 16
Artículo
16AT101050
MANGUITOS DENTADOS 720MXL Z 90
Artículo
MA720MXL