CORREAS PASO METRICO AT10-1200 A. 50
Artículo
50AT101200
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 50 |
Dientes: | 120 |
Desarrollo (mm): | 1.200 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS CON DOBLE DENT. 900 H 100 DES.2286 Z=180
Artículo
DD900H100
POLEAS TRAP. CUBO PLENO SPA 150-4
Artículo
AM01504
CREM. MONTAJE CONTINUO M.8 80X80X500
Artículo
CR39050
BARRAS DENTADAS SERIE HTD 3M Z=038 LU=200
Artículo
B03M038