CORREAS PASO METRICO AT10-1200 A. 16
Artículo
16AT101200
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 16 |
Dientes: | 120 |
Desarrollo (mm): | 1.200 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CASQUILLOS FIJ. FC 20/30
Artículo
KLFC020
POLEAS DENTADAS XL037 (AL) Z=012
Artículo
XA37012
POLEAS TRAP. CUBO PLENO SPB 100-5
Artículo
BM01005
POLEAS TRAP. CASQ.CONICOS SPA140-05
Artículo
AT01405