CORREAS PASO METRICO AT10-1150 A. 32
Artículo
32AT101150
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 32 |
Dientes: | 115 |
Desarrollo (mm): | 1.150 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS H150 Z=027
Artículo
H150027
POLEAS DENTADAS H075 Z=016
Artículo
H075016
CORREAS ACANALADAS 1270 L PULG. 50 NERV. 08
Artículo
1270L08
POLEAS TRAP. CASQ.CONICOS SPZ150-06
Artículo
ZT01506