CORREAS PASO METRICO AT10-1080 A. 50
Artículo
50AT101080
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 50 |
Dientes: | 108 |
Desarrollo (mm): | 1.080 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS HTD 4400 8M 30 Z=550
Artículo
44008M30
CORREAS DENTADAS HTD 4200 8M 30 Z=525
Artículo
42008M30
CORREAS DENTADAS 508 XH 400 DES. 1289 Z=58
Artículo
507XH400
CORREAS PASO METRICO AT10-1050 A. 50
Artículo
50AT101050