CORREAS P. METR.DOB.DENT DT5-1100 A. 16
Artículo
16DT51100
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico (dentadura doble) |
Ancho (mm): | 16 |
Dientes: | 220 |
Desarrollo (mm): | 1.100 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS H200 Z=052
Artículo
H200052
POLEAS TRAP. CASQ.CONICOS SPA224-01
Artículo
AT02241
CORREAS DENTADAS 270 H 150 DES. 685,8 Z=54
Artículo
270H150
CORREAS MULTIBAND SPC 8500 RIB 3
Artículo
MBSPC85003