CORREAS P. METR.DOB.DENT DT10-1880 A. 16
Artículo
16DT101880
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico (dentadura doble) |
Ancho (mm): | 16 |
Dientes: | 188 |
Desarrollo (mm): | 1.880 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS TRAP. CUBO PLENO SPC 160-1
Artículo
CM01601
PINONES SIMPLES 1"1/2X1" Z=023
Artículo
PS14023
PINONES SIMPLES 3/8X7/32 Z=011
Artículo
05SA211
POLEA TENSORA TRIPLE SP 40-AT
Artículo
RE011810