CORREAS P. METR.DOB.DENT DT10-1500 A. 32
Artículo
32DT101500
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico (dentadura doble) |
Ancho (mm): | 32 |
Dientes: | 150 |
Desarrollo (mm): | 1.500 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS HTD 600 8M 30 Z=75
Artículo
6008M30
POLEAS DENTADAS H100 Z=048
Artículo
H100048
POLEAS DENTADAS XL037 (XC) Z=059
Artículo
XC37059
POLEAS TRAP. CASQ.CONICOS SPZ106-03
Artículo
ZT01063