CORREAS MULTIBAND SPC 8500 RIB 8
Artículo
MBSPC85008
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 8 |
Tipo: | Multiband |
Desarrollo (mm): | 8.500 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS TRAP. CASQ.CONICOS SPA212-05
Artículo
AT02125
P.DOBL. P.TAPER DIENT.TRAT 1"X17,02 Z=021
Artículo
TD12T21
PINONES DOBLES 1"X17,02 Z=026
Artículo
PD12026
CORREAS DENTADAS HTD 120 3M 06 Z=40
Artículo
1203M06