MULTIBAND V-BELTS SPC 8500 RIB 8
Item No.
MBSPC85008
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 8 |
Type: | Multiband |
Length (mm): | 8.500 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
POLY V-BELTS 1295 J INCHES 51 RIBS 12
Item No.
1295J12
HTD TIMING BELTS 159 3M 15 Z=53
Item No.
1593M15
RAW EDGE V-BELTS AX 34 DEV. 863
Item No.
AX34
HTD TIMING BELTS 156 3M 06 Z=52
Item No.
1563M06