CORREAS MULTIBAND SPC 8000 RIB 7
Artículo
MBSPC80007
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 7 |
Tipo: | Multiband |
Desarrollo (mm): | 8.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CREM. MONTAJE CONTINUO M.4 25X25X500
Artículo
CR36050
CORREAS ACANALADAS 1422 L PULG. 56 NERV. 20
Artículo
1422L20
CORREAS ACANALADAS 1092 J PULG. 43 NERV. 24
Artículo
1092J24
CORREAS ACANALADAS 1075 L PULG. 42,3 NERV. 20
Artículo
1075L20