CORREAS MULTIBAND SPC 8000 RIB 4
Artículo
MBSPC80004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (mm): | 8.000 |
Material: | Goma |
Peso Neto (Kg): | 14,5 |
CORREAS MULTIBAND SPB 2800 RIB 2
Artículo
MBSPB28002
CORREAS ACANALADAS 1092 J PULG. 43 NERV. 10
Artículo
1092J10
CORREAS PASO METRICO T2.5-120 A. 12
Artículo
12T25120
CORREAS TRAP. CLASICAS B 47 DES. 1207 1/2
Artículo
1207B47