CORREAS MULTIBAND SPC 7100 RIB 5
Artículo
MBSPC71005
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 5 |
Tipo: | Multiband |
Desarrollo (mm): | 7.100 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CREM. MONTAJE CONTINUO M.4 22X22X2000
Artículo
CR37200
CORREAS PASO METRICO T10-1100 A. 16
Artículo
16T101100
CORREAS TRAP. DENTADAS BX 100 DES. 2540
Artículo
BX100
CORREAS DENTADAS HTD 237 3M 06 Z=79
Artículo
2373M06