CORREAS MULTIBAND SPC 5600 RIB 6
Artículo
MBSPC56006
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 6 |
Tipo: | Multiband |
Desarrollo (mm): | 5.600 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS HTD 3M-06 Z=020
Artículo
03M0620
CORREAS P. METR.DOB.DENT DT10-700 A. 50
Artículo
50DT10700
COR.DOBLES PARA DOS CAD.SIMP. 12B1 (TL) Z=015
Artículo
DT11015
PINONES SIMPLES 1/2X5/16 Z=024
Artículo
09SC824