MULTIBAND V-BELTS SPC 5600 RIB 6
Item No.
MBSPC56006
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 6 |
Type: | Multiband |
Length (mm): | 5.600 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
DUPLEX SPR. W. HARD.TEETH 1/2X5/16 Z=025
Item No.
PD09T25
DUPLEX SPR. W. HARD.TEETH 3/4X7/16 Z=021
Item No.
PD11T21
RAW EDGE V-BELTS XPC 2240 - 2270
Item No.
XPC2240
STD TOOTHED BARS ST-5 Z=017 UL=140
Item No.
BST0517