CORREAS MULTIBAND SPC 5600 RIB 2
Artículo
MBSPC56002
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (mm): | 5.600 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS MULTIBAND SPC 8000 RIB 7
Artículo
MBSPC80007
CORREAS PASO METRICO AT5-375 A. 20
Artículo
20AT5375
BRIDA DE ENTRADA VTS 044 - 071B14
Artículo
FIT044071B14
CORREAS PASO METRICO AT5-500 A. 20
Artículo
20AT5500