CORREAS MULTIBAND SPC 5000 RIB 2
Artículo
MBSPC50002
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (mm): | 5.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS PASO METRICO AT10-1100 A. 25
Artículo
25AT101100
CORREAS DENT. EN METROS L COD. 300
Artículo
CML300
REDUCTOR TSF: VP 130 P R80 90B5 B3
Artículo
VP13080P09
PINONES CASQ.CONIC.DOBLES 1"X17,02 Z=013
Artículo
TD12013