CORREAS MULTIBAND SPC 4250 RIB 7
Artículo
MBSPC42507
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 7 |
Tipo: | Multiband |
Desarrollo (mm): | 4.250 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
MANGUITOS CON DOBLE DENT. 600H Z 120
Artículo
MD600H
MANGUITOS CON DOBLE DENT. 510L Z 136
Artículo
MD510L
MANGUITOS CON DOBLE DENT. 800H Z 160
Artículo
MD800H
CORREAS MULTIBAND SPC 5000 RIB 7
Artículo
MBSPC50007