CORREAS MULTIBAND SPC 4250 RIB 6
Artículo
MBSPC42506
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 6 |
Tipo: | Multiband |
Desarrollo (mm): | 4.250 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
BARRAS DENTADAS SERIE HTD 3M Z=023 LU=150
Artículo
B03M023
MANGUITOS PASO METRICO T10-980 W. 300
Artículo
MT10980
CORREAS TRAP. CLASICAS D 93 DES. 2362
Artículo
2362D93
CORREAS MULTIBAND SPB 4500 RIB 5
Artículo
MBSPB45005