CORREAS MULTIBAND SPB 7100 RIB 2
Artículo
MBSPB71002
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (mm): | 7.100 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CADENA DOBLE 3/8 NICKEL
Artículo
06N2
RUEDA EN FUND. SIMPLE P.CASQ.CON. 1/2X5/16 Z=057
Artículo
GS09057
REDUCTOR TSF: VP 110 P R20 132B5 B3
Artículo
VP11020P15
CORREAS CON DOBLE DENT. 600 H 300 DES.1524 Z=120
Artículo
DD600H300