CORREAS MULTIBAND SPB 5600 RIB 7
Artículo
MBSPB56007
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 7 |
Tipo: | Multiband |
Desarrollo (mm): | 5.600 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS TRAP. DENTADAS BX 67 DES. 1700
Artículo
BX67
CORREAS MULTIBAND SPB 6000 RIB 5
Artículo
MBSPB60005
CORREAS DENTADAS HTD 210 3M 12 Z=70
Artículo
2103M12
CORREAS DENTADAS HTD 225 3M 06 Z=75
Artículo
2253M06