CORREAS MULTIBAND SPB 5300 RIB 5
Artículo
MBSPB53005
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 5 |
Tipo: | Multiband |
Desarrollo (mm): | 5.300 |
Material: | Goma |
Peso Neto (Kg): | 7,37 |
POLEAS DENTADAS HTD 5M-09 Z=048
Artículo
05M0948
CORREAS MULTIBAND SPB 5300 RIB 8
Artículo
MBSPB53008
CORREAS ACANALADAS 762 J PULG. 30 NERV. 08
Artículo
762J08
MANGUITOS PASO METRICO T2.5-330 W.130
Artículo
MT25330