CORREAS MULTIBAND SPB 4750 RIB 3
Artículo
MBSPB47503
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (mm): | 4.750 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS PASO METRICO T10-390 A. 16
Artículo
16T10390
CORREAS PASO METRICO AT10-880 A. 32
Artículo
32AT10880
CORREAS PASO METRICO T10-340 A. 16
Artículo
16T10340
CORREAS PASO METRICO T10-440 A. 16
Artículo
16T10440