CORREAS MULTIBAND SPB 4250 RIB 6
Artículo
MBSPB42506
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 6 |
Tipo: | Multiband |
Desarrollo (mm): | 4.250 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS T2,5-16 Z=022
Artículo
16T2022
CASQUILLOS FIJ. FC 17/25
Artículo
KLFC017
CORREAS ACANALADAS 1715 L PULG. 67,5 NERV. 12
Artículo
1715L12
PINONES TRIPLES ASA 60 Z=023
Artículo
PT11A23