CORREAS MULTIBAND SPB 4250 RIB 2
Artículo
MBSPB42502
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (mm): | 4.250 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS HTD 300 5M 15 Z=60
Artículo
3005M15
CORREAS PASO METRICO T10-1500 A. 50
Artículo
50T101500
POLEAS TRAP. CUBO PLENO SPA 75-2
Artículo
AM00752
GUIAS POR CORREA DENTADA FC - T5 25 mm C5
Artículo
SFC52501URG