CORREAS MULTIBAND SPB 3150 RIB 8
Artículo
MBSPB31508
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 8 |
Tipo: | Multiband |
Desarrollo (mm): | 3.150 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENT.DOBLE DENTADO HTD 1120 8M 20 Z=140
Artículo
DD11208M20
POLEAS DENTADAS HTD 5M-25 Z=036
Artículo
05M2536
CORREAS DENTADAS 1700 H 150 DES. 4318 Z=340
Artículo
1700H150
CORREAS DENTADAS HTD 111 3M 09 Z=37
Artículo
1113M09