CORREAS MULTIBAND SPB 2500 RIB 6
Artículo
MBSPB25006
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 6 |
Tipo: | Multiband |
Desarrollo (mm): | 2.500 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS DENT. P. CASQ.CON. XH200 Z=028
Artículo
TXH2028
CORREAS DENTADAS 360 MXL 019 DES. 91,44 Z=45
Artículo
360MXL019
POLEAS DENTADAS H300 Z=028
Artículo
H300028
CORREAS TRAP. CLASICAS C 43 DES. 1090
Artículo
1090C43