CORREAS MULTIBAND B 148 RIB 6
Artículo
MBB1486
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 6 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 148 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS MXL 025 Z=028
Artículo
MXL2528
CORREAS TRAP. CLASICAS Z 18 DES. 460
Artículo
460Z18
CORREAS ACANALADAS 432 J PULG. 17 NERV. 10
Artículo
432J10
POLEAS DENTADAS MXL 025 Z=018
Artículo
MXL2518