CORREAS MULTIBAND B 134 RIB 4
Artículo
MBB1344
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 134 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
PINONES SIMPLES 1/2X5/16 Z=022
Artículo
09SB822
CORREAS DENTADAS 450 L 050 DES. 1143 Z=120
Artículo
450L050
PINONES SIMPLES 1/2X5/16 Z=025
Artículo
09SB825
PINONES CASQ.CONIC.TRIPLES 5/8X3/8 Z=023
Artículo
TT10023