CORREAS MULTIBAND B 134 RIB 3
Artículo
MBB1343
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 134 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
DISCOS SIMPLES 1/2X3/16 Z=012
Artículo
CS07012
CREM. MONTAJE CONTINUO M.3 30X30X500
Artículo
CR30050
PINONES SIMPLES 5/8X3/8 Z=022
Artículo
10SB522
ELEMENTO ELASTICO NEGRO HRC230
Artículo
HRCN230