CORREAS MULTIBAND 8V 3000 RIB 3
Artículo
MB8V30003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 3000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS L100 Z=012
Artículo
L100012
REDUCTOR TSF: VP 150 P R50 132B5 B3
Artículo
VP15050P15
MOTOR ELÉCTR. IE3 225S 4P 37KW 400/690V B35
Artículo
C322537X4B35
CORREAS DENTADAS 750 H 300 DES. 1905 Z=150
Artículo
750H300