CORREAS DENTADAS 255 H 075 DES. 647,7 Z=51
Artículo
255H075
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada pulgada |
Desarrollo (pulgadas): | 255 |
Ancho (pulgadas): | 075 |
Dientes: | 51 |
Desarrollo (mm): | 647,7 |
Material: | Goma |
Peso Neto (Kg): | 0,0534 |
REDUCTOR TSF: VP 130 P R10 132B14 B3
Artículo
VP13010P16
PINONES SIMPLES 1"X17,02 Z=012
Artículo
12SB512
MANGUITOS CON DOBLE DENTADO DT10-1420 W. 300
Artículo
MDT101420
POLEAS TRAP. CASQ.CONICOS SPA315-01
Artículo
AT03151