TIMING BELTS IN METER T10 W. 25
Item No.
CMT1025
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Description
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Type: | Open end timing belt |
Width (mm): | 25 |
Material: | Polyurethane |
Net Weight (Kg): | N.A. |
DUPLEX TAPER-B. SPROCKETS 3/4X7/16 Z=038
Item No.
TD11038
SIMPLEX C/IRON TAPER BORED SPR. 5/8X3/8 Z=095
Item No.
GS10095
VARIATOR BELTS 37X10 DEV. 950
Item No.
950VR37X10
Spur gears with hardened teeth mod. 4 Z=012
Item No.
PM31T12