TIMING BELTS 950 H 100 DEV.2413 Z=190
Item No.
950H100
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Description
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Type: | Timing belt in Inches |
Lenght (inches): | 950 |
Width (inches): | 100 |
Number of teeth: | 190 |
Length (mm): | 2.413 |
Material: | Rubber |
Net Weight (Kg): | 0.2654 |
DUPLEX PLATEW.FOR TWO SINGLE CH. 12B1 (TL) Z=023
Item No.
DT11023
RACKS FOR CONTINUOUS MOUNT.MOD. 1,5 17X17X500
Item No.
CR27050
V-BELT PULLEY W. SOLID HUB SPA 400-2
Item No.
AM04002
DUPLEX C/IRON TAPER BORED SPR. 1/2X5/16 Z=045
Item No.
GD09045