Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS XL037 (AL) Z=052
Item No.
XA37052
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Fastening Type: | Pilot Bore |
| Number of teeth: | 52 |
| Flange: | No |
| Material: | Aluminium |
| Net Weight (Kg): | 0.22 |
TRIPLEX SPROCKETS 3/4X7/16 Z=013
Item No.
PT11013
INCHES TAPER BUSHES 1615 BOR. 1"5/8
Item No.
1650158
DUPLEX SPROCKETS 1/2X5/16 Z=021
Item No.
PD09021
