Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS XL037 (AL) Z=030
Item No.
XA37030
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Fastening Type: | Pilot Bore |
| Number of teeth: | 30 |
| Flange: | Yes |
| Material: | Aluminium |
| Net Weight (Kg): | 0.094 |
DUPLEX PLATEW.FOR TWO SINGLE CH. 12B1 (TL) Z=025
Item No.
DT11025
TIMING PULLEYS TAPER POLYCHAIN GT 14M-20 Z=60
Item No.
1420060
STD TOOTHED BARS XL-1/5 (AL) Z=026 UL=160
Item No.
BXLA026
SEMI-COUPLING SHORT HUB "24"
Item No.
SG0C024
